enderView.ai
Sign InStart free
AwardedWorksEuropeanCompetitive procedure with negotiation

Replacement Combustion System Frame 9/E Gas Turbine RoCa 3 2023

Uniper Benelux N.V. · Competitive procedure with negotiation · 1 lots · 241369
Type
Works
45315200
Estimated value
Not published
To deadline
Ongoing
Knock-outs
n/a
exclusion grounds
Award basis
Best price-quality ratio
Assess manuallyconfidence low

Uniper Benelux N.V. intends to prepare an existing Frame 9/E gas turbine with generator at the RoCa3 location in Rotterdam for a transition from low-caloric to high-caloric gas fuel. Instead of only replacing the fuel nozzles, a new combustion system (DLN-1) will be installed that meets low emission standards and offers the possibility to use up to 30% hydrogen. The works will be carried out during an existing inspection period, thereby limiting the lead time. The assignment requires a high-quality technical system that is compatible with the current turbine, meets safety and performance criteria, and complies with Dutch and European regulations regarding emissions and hydrogen use. Suppliers must have experience with gas turbine systems, hydrogen integration, and emission reduction, and can provide complete installation, testing, documentation, and training.

Works · Competitive procedure with negotiation · European procedure

European
Contracting authority
Uniper Benelux N.V.
Contract type
Works
Competitive procedure with negotiation
Estimated value
Estimate not published
Submission deadline
Ongoing
17:30
Scope
European
European procedure
Lots
1
1 lots
Main CPV code
45315200
Location
Rotterdam
CharacteristicsCPV 45WorksEU tendergas turbinecombustion systemhydrogen

01What is being requested

Uniper Benelux N.V. intends to prepare an existing Frame 9/E gas turbine with generator at the RoCa3 location in Rotterdam for a transition from low-caloric to high-caloric gas fuel. Instead of only replacing the fuel nozzles, a new combustion system (DLN-1) will be installed that meets low emission standards and offers the possibility to use up to 30% hydrogen. The works will be carried out during an existing inspection period, thereby limiting the lead time. The assignment requires a high-quality technical system that is compatible with the current turbine, meets safety and performance criteria, and complies with Dutch and European regulations regarding emissions and hydrogen use. Suppliers must have experience with gas turbine systems, hydrogen integration, and emission reduction, and can provide complete installation, testing, documentation, and training.

On our Uniper Benelux (UBX) location RoCa3 at Rotterdam we have stationed a Frame9/E gas turbine with generator. In 2023 there is a change from Low Caloric Gas to High Caloric Gas planned for the unit. Instead of only changing the fuel nozzles we want to prepare the unit for the future with emission reduction and the possibility to run partly on Hydrogen. During the available time of a Combustion Inspection we want to have replaced the existing DLN-1 system with a new Combustion System together with fuel nozzles that are ready for High Caloric Gas, low emissions and the possibility to run at a

45315200Works
1Lot 1—

02Outcome

Awarded

Thomassen Energy B.V.

03Exclusion grounds

Exclusion grounds — consult the ESPD
  • No specific exclusion grounds were extracted. In a European tender, the mandatory and discretionary grounds of art. 2.86/2.87 of the Dutch Procurement Act almost always apply — check the European Single Procurement Document (ESPD).

04Value in context

Estimate not published

The contracting authority did not publish an estimated value — common for a large share of contracts. The EU threshold for werken is € 5,54 M, for reference.

05Bidders in this segment

#Likely bidderFitWins
1Heijmans Infra B.V.SME9165×
2Sulzer Pumps Wastewater Netherlands B.V.SME8963×
3Croonwolter&dros B.V.SME8726×
4SPIE Nederland B.V.SME8523×
5Unica Installatietechniek B.V.SME8213×
6Facilicom Solutions B.V.SME7714×

06Tender documents

TN332831 - SF06 Aankondiging van een gegunde opdracht - speciale sectoren 20220516094054pdfMay 18, 2022 · 24 KB
WS764064879 - RoCa SCombustion System replacement F9E - Note of Information 1pdfNov 12, 2021 · 825 KB
Additional documents note of information 1zipNov 12, 2021 · 12072 KB
Appendix 6 - 20211014 Price formxlsxOct 17, 2021 · 20 KB
Appendix 2 - Mapping of acceptance-deviation of Uniper terms and ConditionsxlsxOct 17, 2021 · 28 KB
Appendix 4 - Supplier Code of Conduct as of 02.2019pdfOct 17, 2021 · 230 KB
Appendix 1 - General Conditions of Purchase Uniper Benelux (Uniper-EN2018-01)pdfOct 17, 2021 · 258 KB
Appendix 7 - General Safety Regulations of Uniper Benelux (Uniper-EN2020-01)pdfOct 17, 2021 · 160 KB
20211011_WS764064879_TenderDocProjectSpecific_RoCa frame 9E_2023pdfOct 17, 2021 · 405 KB
Appendix 5 - Reference assignment formdocxOct 17, 2021 · 35 KB
20211011_WS764064879_TenderDocProjectGeneral_RoCa frame 9E_2023pdfOct 17, 2021 · 308 KB
Appendix 1 - Terms and Conditions for Purchasing Contracts, Contracts for Work and Materials and Contracts for Work and ServicespdfOct 17, 2021 · 301 KB

07Legal themes that may be relevant here

08Frequently asked questions

What is the purpose of the combustion system replacement?
The purpose is to prepare the existing Frame 9/E gas turbine with generator for a transition from low-caloric gas to high-caloric gas. This involves replacing the current DLN-1 system with a new combustion system and fuel nozzles.
What fuel possibilities does the new combustion system offer?
The new system is designed for use with high-caloric gas, offers possibilities for emission reduction, and enables the turbine to run partially on hydrogen, with a capacity of approximately 30% hydrogen.
When will the works on the gas turbine be carried out?
The replacement of the existing DLN-1 system and the installation of the new fuel nozzles will take place during the available time of an existing Combustion Inspection.

Automatically compiled from the official tender data and documents.

09Estimated value versus the market

p25
€ 1,4 mln
median
€ 3,6 mln
p75
€ 9,1 mln
deze opdracht

Gegunde waarden in CPV 45 · werken n=3159