Sign InStart free
ClosedWorksEuropeanRestricted

31128366: Adjusting OSK sliding stops

Rijkswaterstaat Programma's, Projecten en Onderhoud · Restricted · 1 lots · 238896
Type
Works
45223210
Estimated value
€ 28M
estimated
To deadline
Ongoing
Knock-outs
n/a
exclusion grounds
Award basis
Best price-quality ratio
Assess manuallyconfidence low

Rijkswaterstaat is requesting a contractor to design the sliding stop system for 45 gates (design 3) and to repair damage to the conservation of 39 end pins of 62 gates, caused by temporary measures. Additionally, side stops on 53 gates must be replaced and the spring element must be maintained. All works must be carried out within a project management system based on an ISO 9001-certified quality management system (or equivalent). The procedure is non-public, meaning the tender is closed and only selected suppliers are invited.

Works · Restricted · European procedure

European
Contracting authority
Rijkswaterstaat Programma's, Projecten en Onderhoud
Contract type
Works
Restricted
Estimated value
€27,970,000
estimated value
Submission deadline
Ongoing
15:00
Scope
European
European procedure
Lots
1
1 lots
Main CPV code
45223210
Location
Utrecht
CharacteristicsCPV 45WorksEU tendersliding stopISO 9001Rijkswaterstaat

01What is being requested

Rijkswaterstaat is requesting a contractor to design the sliding stop system for 45 gates (design 3) and to repair damage to the conservation of 39 end pins of 62 gates, caused by temporary measures. Additionally, side stops on 53 gates must be replaced and the spring element must be maintained. All works must be carried out within a project management system based on an ISO 9001-certified quality management system (or equivalent). The procedure is non-public, meaning the tender is closed and only selected suppliers are invited.

The contractor must primarily perform the following works: -Applying design 3 of the sliding stop system to the remaining 45 gates; -Repairing conservation damage to 39 end pins of the 62 gates caused by the temporary measures; -Replacing side stops on 53 gates and maintaining the spring element; All works according to the agreement must be performed on the basis of a project management system. This project management system, including its underlying processes, must be based on a quality management system, or in the case of a combination, potentially multiple quality management systems, that

45223210€ 28MWorks
1Lot 1—

02Exclusion grounds

Exclusion grounds — consult the ESPD
  • No specific exclusion grounds were extracted. In a European tender, the mandatory and discretionary grounds of art. 2.86/2.87 of the Dutch Procurement Act almost always apply — check the European Single Procurement Document (ESPD).

03Value in context

€27,970,000

04Likely competitors

#Likely bidderFitWins
1Heijmans Infra B.V.SME9965×
2ENGIE Infra & Mobility B.V.SME9969×
3KWS Infra B.V.SME9892×
4Boskalis Nederland B.V.SME9769×
5Van Oord Nederland BVSME9719×
6Dura Vermeer Infra Regionale Projecten BVSME9658×

05Legal themes that may be relevant here

06Frequently asked questions

What does the assignment for adjusting the sliding stops entail?
The assignment includes applying design 3 of the sliding stop system to 45 gates, repairing conservation damage to 39 end pins of 62 gates, replacing side stops on 53 gates and maintaining the spring element.
Which quality standards must the project management system comply with?
All works must be carried out on the basis of a project management system based on a quality management system that is certified according to the current version of the NEN-EN-ISO 9001 standard or an equivalent system by an accredited certification body.

Automatically compiled from the official tender data and documents.

07Estimated value versus the market

p25
€ 1,4 mln
median
€ 3,6 mln
p75
€ 9,1 mln
€ 28 mln

Gegunde waarden in CPV 45 · werken n=3159